Low Profile Racks

Low Profile Racks

Painters and e-coaters have unique small part handling problems. Endura has addressed many of these problems with a unique line of two and four-sided low profile tension painting racks.


FasTrack Equipment

Low Profile Racks are custom designed.

Endura one, two and four sided low profile painting and e-coating tension racks can be used with FasTrack equipment.

Small Parts with High Density

Low profile racking system is ideal for small parts allowing maximum part density per rack.


Grip and Ground

Low Profile Racks virtually eliminate part loss.

Endura low profile tension racks provide a strong grip and superior ground on small parts.

Total Rack Area

Obviously, the total area of the rack is important. Minimizing the total surface area of the rack minimizes the amount of paint that will adhere to the rack.

One, two and four-sided Endura low profile racks are strong and durable, while minimizing total rack area.

Video: Adjusting off center racks

Part Density

Endura low profile racks are custom designed to meet specific customer requirements. Rack length and tension finger spacing is configured to maximize part density on each rack.


Low Profile Racks and heat.

Most painters strip their racks, using chemical stripper or by burning the paint off.  Chemical strippers don’t affect racks, but burning them off can remove the temper from tension racks if they get too hot.

Many Endura painting racks are available made of either ferrous or stainless spring steel. Customers, who use chemical strippers, may choose to use stainless or ferrous metal racks.

Customers, who burn off their racks, prefer stainless steel, as this material can tolerate higher burn off temperatures.

Liquid Containment in the Rack

Liquid containment in the rack can cause two different problems. First, there is contamination between wash tanks caused by carryover.

Second, any liquid trapped in the rack can boil out in the curing oven and damage the finish on the parts.

Endura racks are designed to minimize liquid containment in the rack. As a result, carryover contamination and liquid boil out is dramatically reduced.

Losing Parts

Low Profile Racks practically eliminate part loss.

Parts falling off hook racks is a common problem with both wash tanks and spray wash systems. Tension racks grip small parts securely and practically eliminate part loss.




Customers who burn off painting and/or e-coating racks must ensure the burn off temperature does not remove the temper from the racks. Damage to racks caused by excessive burn off temperature is not covered under warranty.